Handling IP address change

This article describes some issues and their corresponding solutions related to access point disconnection, reconnection, IP address change, and how to handle these events in your PJSIP applications, specifically for PJSIP version 2.7 or later. This wiki will focus on the new API pjsua_handle_ip_change().

Problem description

IP address change and/or access point disconnection and reconnection are scenarios that need to be handled in mobile applications. Few issues or scenarios related to this for example are:

  • user moves outside the range of a Wi-Fi access point (AP) and lost the connection

  • user moves outside the range of one AP and reconnect to another

  • the handset may get new IP address if user reconnects to different AP

API: pjsua_handle_ip_change()

Since 2.7, pjsua API introduce a new API (pjsua_handle_ip_change()) to handle IP address change. This way, application only needs to detect for IP address change event, and let the library handle the IP address change based on the configuration.

pjsua_handle_ip_change() flow

When invoked, the stack will:

  1. Restart the SIP transport listener

    This will restart TCP/TLS listener no matter whether they are enabled or not when the transport were created. If you don’t have any use of the listener, you can disable this. However, if you do need this, then on some platform (e.g: on IOS), some delay is needed when restarting the the listener.

    ref: pjsua_ip_change_param::restart_listener and pjsua_ip_change_param::restart_lis_delay.

  2. Shutdown the SIP transport used by account registration

    On some platform (e.g: iOS), it is necessary to shutdown the transport used by registration, since presumably the socket is already in a bad state.

    ref: ip_change_cfg.shutdown_tp in pjsua_acc_config.

  3. Update contact URI by sending re-Registration

    The server needs to be updated of the new Contact URI when the IP address changed. Set it to PJ_TRUE to allow the stack update contact URI to the server.

    ref: pjsua_acc_config::allow_contact_rewrite and pjsua_acc_config::contact_rewrite_method.

  4. Hangup active calls or continue the call by sending re-INVITE

    You can either hangup or maintain the ongoing/active calls. If you intend to maintain the active calls, updating dialog’s contact URI is required. This can be done by specifying pjsua_callback::PJSUA_CALL_UPDATE_CONTACT to the reinvite flags. Note that, hanging up calls might be inevitable on some cases, please see Network change to the same IP address type. (IPv4 to IPv4) or (IPv6 to IPv6) section below.

    ref: pjsua_ip_change_acc_cfg::hangup_calls and pjsua_ip_change_acc_cfg::reinvite_flags in pjsua_acc_config::ip_change_cfg

Notes and limitations

To monitor the progress of IP change handling, application can use pjsua_callback::on_ip_change_progress callback. The callback will notify application of these events:

  • SIP transport listener restart,

  • SIP transport shutdown,

  • contact update (re-registration process), and

  • calls hangup or retry (re-INVITE).

Related to maintaining a call during IP change, there are some scenarios that are currently not implemented by IP change mechanism, so application needs to handle manually: If IP change occurs during SDP negotiation (and it is not completed yet, so there cannot be another SDP offer), updating such call needs to be done in two steps:

  1. Update Contact header, so remote endpoint can send its SDP answer to our new contact address, i.e: use UPDATE without SDP offer (PJSUA_CALL_NO_SDP_OFFER :flag). Note that, not every endpoint supports UPDATE. Contact is used by remote to resolve target before sending new requests. If proxy is used, then you can probably skip this.

  2. Update Contact header, so remote endpoint can send its SDP answer to our new contact address, i.e: use UPDATE without SDP offer (PJSUA_CALL_NO_SDP_OFFER flag). Note that, not every endpoint supports UPDATE. Contact is used by remote to resolve target before sending new requests. If proxy is used, then you can probably skip this.

  3. Update local media transport after SDP answer is received, by sending UPDATE/re-INVITE with PJSUA_CALL_REINIT_MEDIA flag.

If IP change occurs before a call is confirmed:

  • For outgoing call, the call will be disconnected and reported to application via pjsua_callback::on_call_state.

  • For incoming call however, it will continue to be active. Application can manually hangup the call if desired.

IP change scenarios

Network change to the same IP address type. (IPv4 to IPv4) or (IPv6 to IPv6)

Update contact process (re-Registration) and call handling (hang-up or continue the call) should be handled by the API (pjsua_handle_ip_change()) without any special treatment from the application.

Network change to a different IP address type. (IPv4 to IPv6) or (IPv6 to IPv4)

As you already know, IPv6 needs specific account configuration as described [wiki:ipv6 here]. On the case of IP address type change, then additional steps are required from application.

  1. Once application detects a network with IP address type change, a new transport might need to be created.

  2. Once the transport is available, modify account’s transport preference setting if necessary by calling pjsua_acc_modify(), and then call pjsua_handle_ip_change().

static void ip_change_to_ip6()
{
    ...
    // Create new IPv6 transport, if it's not yet available. e.g: TLS6
    status = pjsua_transport_create(PJSIP_TRANSPORT_TLS6,
                                    &tp_cfg, &transport_id);
    ...

    // For PJSIP earlier than 2.14
    // Bind account to IPv6 transport
    // pjsua_acc_set_transport(acc_id, transport_id);

    // Modify account configuration
    pjsua_acc_get_config(acc_id, app_config.pool, &acc_cfg);

    // ******************************************************
    // ** For PJSIP 2.14 and above:
    // Set SIP use to PJSUA_IPV6_ENABLED_USE_IPV6_ONLY
    // Important: if you use PREFER_IPV6, existing calls that
    // use IPv4 will still use IPv4.
    acc_cfg.ipv6_sip_use = PJSUA_IPV6_ENABLED_USE_IPV6_ONLY;
    // Set media use to USE_IPV6_ONLY or PREFER_IPV6.
    acc_cfg.ipv6_media_use = PJSUA_IPV6_ENABLED_USE_IPV6_ONLY;
    // ** For PJSIP earlier than 2.14:
    // acc_cfg.ipv6_media_use = PJSUA_IPV6_ENABLED;
    // ******************************************************

    // acc_cfg.ip_change_cfg.hangup_calls = PJ_TRUE;

    // Available in #3910, to prevent pjsua_acc_modify()
    // to prematurely send registration
    acc_cfg.disable_reg_on_modify = PJ_TRUE;
    pjsua_acc_modify(acc_id, &acc_cfg);

    ...
    // Handle ip change
    pjsua_ip_change_param_default(&param);
    pjsua_handle_ip_change(param);
}

IP address change detection

iOS

Have a look at Reachability API.

Android

Have a look at ConnectivityManager.